MultiECUScan Green, Red, Yellow & Purple Adaptors Technical Details Advised by MultiECUScan / FiatECUScan diagnostic software Compatible with ELM327 or/and KKL (VAG COM) 4 x 16 Pin OBD Cable Adaptors See MultiECUScan / FiatEcuScan website for a full list of supported vehicles Product Description Introduction: Four ODB cable adapters to allow additional diagnostic options for Italian cars. These include ENIGINE, ABS, POWER STEERING, ELECTRIC HOOD and CAN ECU's.
Specification: Green Adaptor Lead (MultiECUScan / FiatEcuScan Adaptor 1) = Engine, ABS, Power Steering Red Adaptor Lead (MultiECUScan / FiatEcuScan Adaptor 2) = Airbag Yellow Adaptor Lead (MultiECUScan / FiatEcuScan Adaptor 3) = CAN Purple Adaptor Lead (MultiECUScan / FiatEcuScan Adaptor 4) = Electric Hood
Pin Configurations: Green Adaptor Lead = Female pin 7 to male pins 1,7,9,12. Red Adaptor Lead = Female pin 7 to male pin 3 Yellow Adaptor Lead = Female pin 6 to male pin 1 / Female pin 14 to male pin 9 / Female pin 7 to male pin 12 Purple Adaptor Lead = Female pin 7 to male pins 7,8,11,13
Additional Items Required: An ELM327 or KKL (VAG COM) diagnostic cable to connect to these adaptors. MultiECUScan / FiatEcuScan software (free or full version).
Supported Vehicles: See the http://www.multiecuscan.net/SupportedVehiclesList.aspx on the MultiECUScan website for coverage details
Other Details: Cables fully tested on supported model before shipping. No responsibility can be accepted for any damage caused by the lead. Some models may require the full version of MultiECUScan / FiatEcuScan to communicate with some ECUs.
|