Proudct search:
 Porducts List
 
CHIP TUNING tool
Diagnostic Cable Accessories
VAG DIAGNOSTIC
OPEL diagnostic
Code obdii scanner
ELM327
Odometer Correction /KM RESET
Vckecker scanner
Key Copy Machine/KEY PROGRAMME
BMW/MB CARSOFT
PROGRAMMER
PIN Selector/Breakout Box
SI RESET
Professional Diagnostic tool
Nissan Consult
Airbag reset tool
UNISCAN
Other products
MOTORCYCLE


NameVAG HEX CAN BUS V504
Specification:
Description
 

ATTENTION: HEX-USB-CAN Interface compatible with VAG-COM 504.1 , higher versions are not recommended!

Features:
• USB connector plugs into most modern laptops!   (USB 1.1 or 2.0)
• Compatible with the latest cars which require a direct CAN connection for diagnostics including all Golf-5 platform cars and latest Audi A3, A6 and A8.
• Protocol timing indistinguishable from a real VAG/VAS tool.  Works reliably even with "difficult" control modules such as the 1991-1994 1Z Audi TDIs and the 1993-1994 Audi 2.6L with Hella ECU.
• Built-In VAG-Saver functionality -- instantly alerts the user if either the K/K1 line or the L/K2 line is shorted to Ground or Vbatt.
• Full support for dual-K lines found in "new" (B6/8E chassis Audi A4 and 2002+ Audi A6 -- no VAS-6017 required -- no manual switches!
• Fully backwards compatible with older cars using a single K-line or
K plus L.
• Bi-Color (red/green) status/activity LED


 Vehicle list:
- All Golf-5 platform cars        (A5 platform) including:
* 2003+ VW Touran             (1T chassis)
* 2004+ VW Golf                  (1K chassis)
* 2004+ VW Caddy              (2K chassis)
* 2004+ VW Audi A3            (8P chassis)
* 2004+ VW Seat Altea        (5P chassis)
* 2004+ VW Skoda Octavia (1Z chassis)
* 2005+ Seat Toledo            (5P chassis)
* 2005+ Golf Plus                 (5M chassis)
* 2005+ Seat Leon               (1P chassis)
* 2005.5+ Jetta                     (1K chassis)
-   2003+ Audi A8 & A8L            (D3 platform, 4E chassis)
-   2005+ Audi A6                      (C6 platform, 4F chasis)
-   2005+ Audi A4                      (“B7” platform (some control modules)
-   2005.5+ VW Passat              (B6 platform, 3C chassis)

 

CAN system details
What is CAN and why is it important?
CAN stands for Controller Area Network. CAN is a new means of communicating with the car for diagnostics used by the latest generations of VW, Audi, SEAT, and Skoda vehicles. Unlike the older ISO9141 system, which used a single K-line for diagnostic communications, the new CAN-Bus system uses a twisted pair of wires with differential signaling. CAN is considerably faster than ISO-9141 (500 kpbs vs. 10.4 kbps). Both new hardware and new software are required in order to communicate with cars using CAN for diagnostics.

 

 


 
Copyright (C) 2008 AUTODIAG TECHNOLOGY CO。,LTD All rights reserved.